Power system protection / Paul M. Anderson, Charles Henville, Rasheek Rifaat, Brian Johnson, Sakis Meliopoulos.

By: Anderson, P. M. (Paul M.), 1926- [author.]
Contributor(s): Henville, Charles [author.] | Rifaat, Rasheek [author.] | Johnson, Brian [author.] | Meliopoulos, Sakis [author.]
Language: English Series: IEEE Press series on power and energy systems: Publisher: Hoboken, NJ : Wiley : IEEE Press, 2022Edition: Second editionDescription: 1 online resourceContent type: text Media type: computer Carrier type: online resourceISBN: 9781119513148; 9781119513100; 1119513103; 9781119513117; 1119513111Subject(s): Electric power systems -- ProtectionGenre/Form: Electronic books.DDC classification: 621.31 LOC classification: TK1010Online resources: Full text is available at Wiley Online Library Click here to view.
Contents:
Table of Contents Author Biographies xxv Preface to the Second Edition xxvii List of Symbols xxix Part I Protective Devices and Controls 1 1 Introduction 3 1.1 Power System Protection 3 1.2 Prevention and Control of System Failure 3 1.3 Protective System Design Considerations 8 1.4 Definitions Used in System Protection 9 1.5 System Disturbances 11 1.6 Book Contents 12 Problems 14 References 15 2 Protection Measurements and Controls 17 2.1 Graphic Symbols and Device Identification 17 2.2 Typical Relay Connections 19 2.3 Circuit Breaker Control Circuits 22 2.4 Instrument Transformers 23 2.5 Relay Control Configurations 37 2.6 Optical Communications 38 Problems 42 References 44 3 Protective Device Characteristics 47 3.1 Introduction 47 3.2 Fuse Characteristics 48 3.3 Relay Characteristics 61 3.4 Power Circuit Breakers 87 3.5 Automatic Circuit Reclosers 93 3.6 Automatic Line Sectionalizers 98 3.7 Circuit Switchers 100 3.8 Digital Fault Recorders 101 Problems 103 References 103 4 Relay Logic 109 4.1 Introduction 109 4.2 Electromechanical Relay Logic 110 4.3 Electronic Logic Circuits 111 4.4 Analog Relay Logic 125 4.5 Digital Relay Logic 128 4.6 Hybrid Relay Logic 139 4.7 Relays as Comparators 140 Problems 153 References 157 5 System Characteristics 163 5.1 Power System Faults 163 5.2 Station Arrangements 176 5.3 Overhead Line Impedances 182 5.4 Computation of Available Fault Current 184 5.5 System Equivalent for Protection Studies 188 5.6 The Compensation Theorem 202 5.7 Compensation Applications in Fault Studies 205 Problems 210 References 214 Part II Protection Concepts 215 6 Fault Protection of Radial Lines 217 6.1 Radial Distribution Systems 217 6.2 Radial Distribution Coordination 219 6.3 Radial Line Fault Current Calculations 222 6.4 Radial System Protective Strategy 233 6.5 Coordination of Protective Devices 236 6.6 Relay Coordination on Radial Lines 241 6.7 Coordinating Protective Devices Measuring Different Parameters 258 Problems 269 References 276 7 Introduction to Transmission Protection 277 7.1 Introduction 277 7.2 Protection with Overcurrent Relays 278 7.3 Distance Protection of Lines 285 7.4 Unit Protection 299 7.5 Ground Fault Protection 301 7.6 Summary 310 Problems 311 References 315 8 Complex Loci in the Z and Y Planes 317 8.1 The Inverse Z Transformation 317 8.2 Line and Circle Mapping 320 8.3 The Complex Equation of a Line 327 8.4 The Complex Equation of a Circle 328 8.5 Inversion of an Arbitrary Admittance 330 8.6 Inversion of a Straight Line Through (1, 0) 333 8.7 Inversion of an Arbitrary Straight Line 335 8.8 Inversion of a Circle with Center at (1, 0) 336 8.9 Inversion of an Arbitrary Circle 338 8.10 Summary of Line and Circle Inversions 340 8.11 Angle Preservation in Conformal Mapping 341 8.12 Orthogonal Trajectories 342 8.13 Impedance at the Relay 346 Problems 348 References 350 9 Impedance at the Relay 351 9.1 The Relay Apparent Impedance, ZR 351 9.2 Protection Equivalent M Parameters 353 9.3 The Circle Loci Z = P/(1±YK) 356 9.4 ZR Loci Construction 357 9.5 Relay Apparent Impedance 363 9.6 Relay Impedance for a Special Case 371 9.7 Construction of M Circles 375 9.8 Phase Comparison Apparent Impedance 378 Problems 384 References 388 10 Admittance at the Relay 391 10.1 Admittance Diagrams 391 10.2 Input Admittance Loci 392 10.3 The Relay Admittance Characteristic 395 10.4 Parallel Transmission Lines 400 10.5 Typical Admittance Plane Characteristics 404 10.6 Summary of Admittance Characteristics 407 Problems 408 Reference 411 Part III Transmission Protection 413 11 Analysis of Distance Protection 415 11.1 Introduction 415 11.2 Analysis of Transmission Line Faults 415 11.3 Impedance at the Relay 429 11.4 Distance Relay Settings 439 11.5 Ground Distance Protection 447 11.6 Distance Relay Coordination 449 Problems 452 References 454 12 Transmission Line Mutual Induction 457 12.1 Introduction 457 12.2 Line Impedances 458 12.3 Effect of Mutual Coupling 469 12.4 Short Transmission Line Equivalents 476 12.5 Long Transmission Lines 484 12.6 Long Transmission Line Equivalents 493 12.7 Solution of the Long-line Case 501 Problems 504 References 507 13 Pilot Protection Systems 509 13.1 Introduction 510 13.2 Physical Systems for Pilot Protection 512 13.3 Non-unit Pilot Protection Schemes 523 13.4 Unit Protection Pilot Schemes 536 13.5 An Example of EHV Line Protection 548 13.6 Pilot Protection Settings 554 13.7 Traveling Wave Relays 561 13.8 Monitoring of Pilot Performance 567 Problems 567 References 569 14 Complex Transmission Protection 573 14.1 Introduction 573 14.2 Single-phase Switching of Extra-high-voltage Lines 573 14.3 Protection of Multiterminal Lines 581 14.4 Protection of Mutually Coupled Lines 590 Problems 613 References 617 15 Series Compensated Line Protection 619 15.1 Introduction 619 15.2 Faults with Unbypassed Series Capacitors 621 15.3 Series Capacitor Bank Protection 634 15.4 Relay Problems Due to Compensation 653 15.5 Protection of Series Compensated Lines 674 15.6 Line Protection Experience 678 Problems 680 References 683 Part IV Apparatus Protection 685 16 Bus Protection 687 16.1 Introduction 687 16.2 Bus Configurations and Faults 688 16.3 Bus Protection Requirements 689 16.4 Bus Protection by Backup Line Relays 691 16.5 Bus Differential Protection 692 16.6 Other Types of Bus Protection 708 16.7 Auxiliary Tripping Relays 716 16.8 Summary 717 Problems 717 References 719 17 Transformer and Reactor Protection 721 17.1 Introduction 721 17.2 Transformer Faults 722 17.3 Magnetizing Inrush 729 17.4 Protection Against Incipient Faults 732 17.5 Protection Against Active Faults 735 17.6 Combined Line and Transformer Schemes 748 17.7 Regulating Transformer Protection 750 17.8 Shunt Reactor Protection 752 17.9 Static Var Compensator Protection 755 Problems 759 References 761 18 Generator Protection 763 18.1 Introduction 763 18.2 Generator System Configurations and Types of Protection 764 18.3 Stator Protection 766 18.4 Rotor Protection 781 18.5 Loss of Excitation Protection 785 18.6 Other Generator Protection Systems 789 18.7 Summary of Generator Protection 794 Problems 800 References 803 19 Motor Protection 805 19.1 Introduction 805 19.2 Induction Motor Analysis 806 19.3 Induction Motor Heating 824 19.4 Motor Problems 837 19.5 Classifications of Motors 843 19.6 Stator Protection 845 19.7 Rotor Protection 851 19.8 Other Motor Protections 852 19.9 Summary of Large Motor Protections 853 Problems 854 References 858 Part V System Aspects of Protection 861 20 Protection Against Abnormal System Frequency 863 20.1 Abnormal Frequency Operation 863 20.2 Effects of Frequency on the Generator 864 20.3 Frequency Effects on the Turbine 866 20.4 A System Frequency Response Model 869 20.5 Off Normal Frequency Protection 886 20.6 Steam Turbine Frequency Protection 887 20.7 Underfrequency Protection 889 Problems 903 References 905 21 Protective Schemes for Stability Enhancement 909 21.1 Introduction 909 21.2 Review of Stability Fundamentals 909 21.3 System Transient Behavior 918 21.4 Automatic Reclosing 929 21.5 Loss of Synchronism Protection 949 21.6 Voltage Stability and Voltage Collapse 957 21.7 System Integrity Protection Schemes (SIPS) 960 21.8 Summary 968 Problems 968 References 970 22 Line Commutated Converter HVDC Protection 973 22.1 Introduction 973 22.2 LCC Dc Conversion Fundamentals 974 22.3 Converter Station Design 992 22.4 Ac Side Protection 999 22.5 Dc Side Protection Overview 1002 22.6 Special HVDC Protections 1012 22.7 HVDC Protection Settings 1015 22.8 Summary 1016 Problems 1016 References 1018 23 Voltage Source Converter HVDC Protection 1021 23.1 Introduction 1021 23.2 VSC HVDC Fundamentals 1022 23.3 Converter Control Systems 1028 23.4 HVDC Response to Ac System Faults 1030 23.5 Ac System Protection 1031 23.6 Dc Faults 1035 23.7 Multiterminal Systems 1037 23.8 Hybrid LCC–VSC Systems 1037 23.9 Summary 1038 Problems 1038 References 1039 24 Protection of Independent Power Producer Interconnections 1041 24.1 Introduction 1041 24.2 Renewable Resources 1042 24.3 Transmission Interconnections 1042 24.4 Distribution Interconnections 1053 24.5 Summary 1060 Problems 1061 References 1061 25 SSR and SSCI Protection 1063 25.1 Introduction 1063 25.2 SSR Overview 1063 25.3 SSR and SSCI System Countermeasures 1073 25.4 SSR Source Countermeasures 1079 25.5 Summary 1093 Problems 1093 References 1095 Part VI Reliability of Protective Systems 1101 26 Basic Reliability Concepts 1103 26.1 Introduction 1103 26.2 Probability Fundamentals 1103 26.3 Random Variables 1110 26.4 Failure Definitions and Failure Modes 1127 26.5 Reliability Models 1129 Problems 1141 References 1143 27 Reliability Analysis 1145 27.1 Reliability Block Diagrams 1145 27.2 Fault Trees 1154 27.3 Reliability Evaluation 1166 27.4 Other Analytical Methods 1174 27.5 State Space and Markov Processes 1182 Problems 1190 References 1195 28 Reliability Concepts in System Protection 1197 28.1 Introduction 1197 28.2 System Disturbance Models 1197 28.3 Time-Independent Reliability Models 1208 28.4 Time-Dependent Reliability Models 1246 Problems 1256 References 1259 29 Fault Tree Analysis of Protective Systems 1261 29.1 Introduction 1261 29.2 Fault Tree Analysis 1262 29.3 Analysis of Transmission Protection 1273 29.4 Fault Tree Evaluation 1297 Problems 1306 References 1310 30 Markov Modeling of Protective Systems 1311 30.1 Introduction 1311 30.2 Testing of Protective Systems 1312 30.3 Modeling of Inspected Systems 1317 30.4 Monitoring and Self-testing 1331 30.5 The Unreadiness Probability 1337 30.6 Protection Abnormal Unavailability 1341 30.7 Evaluation of Safeguard Systems 1350 References 1356 Appendix A Protection Terminology 1359 A.1 Protection Terms and Definitions 1359 A.2 Relay Terms and Definitions 1361 A.3 Classification of Relay Systems 1363 A.4 Circuit Breaker Terms and Definitions 1366 References 1368 Appendix B Protective Device Classification 1371 B.1 Device Function Numbers 1371 B.2 Devices Performing More than One Function 1371 B.2.1 Suffix Numbers 1373 B.2.2 Suffix Letters 1373 B.2.3 Representation of Device Contacts on Electrical Diagrams 1374 Appendix C Overhead Line Impedances 1375 References 1387 Appendix D Transformer Data 1389 Appendix E 500 kV Transmission Line Data 1393 E.1 Tower Design 1393 E.2 Unit Length Electrical Characteristics 1393 E.3 Total Line Impedance and Admittance 1394 E.4 Nominal Pi 1395 E.5 ABCD Parameters 1395 E.6 Equivalent Pi 1395 E.7 Surge Impedance Loading 1397 E.8 Normalization 1399 E.9 Line Ratings and Operating Limits 1399 References 1400 Index 1401
Summary: Description A newly updated guide to the protection of power systems in the 21st century Power System Protection, 2nd Edition combines brand new information about the technological and business developments in the field of power system protection that have occurred since the last edition was published in 1998. The new edition includes updates on the effects of short circuits on: Power quality Multiple setting groups Quadrilateral distance relay characteristics Loadability It also includes comprehensive information about the impacts of business changes, including deregulation, disaggregation of power systems, dependability, and security issues. Power System Protection provides the analytical basis for design, application, and setting of power system protection equipment for today's engineer. Updates from protection engineers with distinct specializations contribute to a comprehensive work covering all aspects of the field. New regulations and new components included in modern power protection systems are discussed at length. Computer-based protection is covered in-depth, as is the impact of renewable energy systems connected to distribution and transmission systems.
Tags from this library: No tags from this library for this title. Log in to add tags.
    Average rating: 0.0 (0 votes)
Item type Current location Home library Call number Status Date due Barcode Item holds
EBOOK EBOOK COLLEGE LIBRARY
COLLEGE LIBRARY
621.31 An2311 2021 (Browse shelf) Available
Total holds: 0

Table of Contents
Author Biographies xxv

Preface to the Second Edition xxvii

List of Symbols xxix

Part I Protective Devices and Controls 1

1 Introduction 3

1.1 Power System Protection 3

1.2 Prevention and Control of System Failure 3

1.3 Protective System Design Considerations 8

1.4 Definitions Used in System Protection 9

1.5 System Disturbances 11

1.6 Book Contents 12

Problems 14

References 15

2 Protection Measurements and Controls 17

2.1 Graphic Symbols and Device Identification 17

2.2 Typical Relay Connections 19

2.3 Circuit Breaker Control Circuits 22

2.4 Instrument Transformers 23

2.5 Relay Control Configurations 37

2.6 Optical Communications 38

Problems 42

References 44

3 Protective Device Characteristics 47

3.1 Introduction 47

3.2 Fuse Characteristics 48

3.3 Relay Characteristics 61

3.4 Power Circuit Breakers 87

3.5 Automatic Circuit Reclosers 93

3.6 Automatic Line Sectionalizers 98

3.7 Circuit Switchers 100

3.8 Digital Fault Recorders 101

Problems 103

References 103

4 Relay Logic 109

4.1 Introduction 109

4.2 Electromechanical Relay Logic 110

4.3 Electronic Logic Circuits 111

4.4 Analog Relay Logic 125

4.5 Digital Relay Logic 128

4.6 Hybrid Relay Logic 139

4.7 Relays as Comparators 140

Problems 153

References 157

5 System Characteristics 163

5.1 Power System Faults 163

5.2 Station Arrangements 176

5.3 Overhead Line Impedances 182

5.4 Computation of Available Fault Current 184

5.5 System Equivalent for Protection Studies 188

5.6 The Compensation Theorem 202

5.7 Compensation Applications in Fault Studies 205

Problems 210

References 214

Part II Protection Concepts 215

6 Fault Protection of Radial Lines 217

6.1 Radial Distribution Systems 217

6.2 Radial Distribution Coordination 219

6.3 Radial Line Fault Current Calculations 222

6.4 Radial System Protective Strategy 233

6.5 Coordination of Protective Devices 236

6.6 Relay Coordination on Radial Lines 241

6.7 Coordinating Protective Devices Measuring Different Parameters 258

Problems 269

References 276

7 Introduction to Transmission Protection 277

7.1 Introduction 277

7.2 Protection with Overcurrent Relays 278

7.3 Distance Protection of Lines 285

7.4 Unit Protection 299

7.5 Ground Fault Protection 301

7.6 Summary 310

Problems 311

References 315

8 Complex Loci in the Z and Y Planes 317

8.1 The Inverse Z Transformation 317

8.2 Line and Circle Mapping 320

8.3 The Complex Equation of a Line 327

8.4 The Complex Equation of a Circle 328

8.5 Inversion of an Arbitrary Admittance 330

8.6 Inversion of a Straight Line Through (1, 0) 333

8.7 Inversion of an Arbitrary Straight Line 335

8.8 Inversion of a Circle with Center at (1, 0) 336

8.9 Inversion of an Arbitrary Circle 338

8.10 Summary of Line and Circle Inversions 340

8.11 Angle Preservation in Conformal Mapping 341

8.12 Orthogonal Trajectories 342

8.13 Impedance at the Relay 346

Problems 348

References 350

9 Impedance at the Relay 351

9.1 The Relay Apparent Impedance, ZR 351

9.2 Protection Equivalent M Parameters 353

9.3 The Circle Loci Z = P/(1±YK) 356

9.4 ZR Loci Construction 357

9.5 Relay Apparent Impedance 363

9.6 Relay Impedance for a Special Case 371

9.7 Construction of M Circles 375

9.8 Phase Comparison Apparent Impedance 378

Problems 384

References 388

10 Admittance at the Relay 391

10.1 Admittance Diagrams 391

10.2 Input Admittance Loci 392

10.3 The Relay Admittance Characteristic 395

10.4 Parallel Transmission Lines 400

10.5 Typical Admittance Plane Characteristics 404

10.6 Summary of Admittance Characteristics 407

Problems 408

Reference 411

Part III Transmission Protection 413

11 Analysis of Distance Protection 415

11.1 Introduction 415

11.2 Analysis of Transmission Line Faults 415

11.3 Impedance at the Relay 429

11.4 Distance Relay Settings 439

11.5 Ground Distance Protection 447

11.6 Distance Relay Coordination 449

Problems 452

References 454

12 Transmission Line Mutual Induction 457

12.1 Introduction 457

12.2 Line Impedances 458

12.3 Effect of Mutual Coupling 469

12.4 Short Transmission Line Equivalents 476

12.5 Long Transmission Lines 484

12.6 Long Transmission Line Equivalents 493

12.7 Solution of the Long-line Case 501

Problems 504

References 507

13 Pilot Protection Systems 509

13.1 Introduction 510

13.2 Physical Systems for Pilot Protection 512

13.3 Non-unit Pilot Protection Schemes 523

13.4 Unit Protection Pilot Schemes 536

13.5 An Example of EHV Line Protection 548

13.6 Pilot Protection Settings 554

13.7 Traveling Wave Relays 561

13.8 Monitoring of Pilot Performance 567

Problems 567

References 569

14 Complex Transmission Protection 573

14.1 Introduction 573

14.2 Single-phase Switching of Extra-high-voltage Lines 573

14.3 Protection of Multiterminal Lines 581

14.4 Protection of Mutually Coupled Lines 590

Problems 613

References 617

15 Series Compensated Line Protection 619

15.1 Introduction 619

15.2 Faults with Unbypassed Series Capacitors 621

15.3 Series Capacitor Bank Protection 634

15.4 Relay Problems Due to Compensation 653

15.5 Protection of Series Compensated Lines 674

15.6 Line Protection Experience 678

Problems 680

References 683

Part IV Apparatus Protection 685

16 Bus Protection 687

16.1 Introduction 687

16.2 Bus Configurations and Faults 688

16.3 Bus Protection Requirements 689

16.4 Bus Protection by Backup Line Relays 691

16.5 Bus Differential Protection 692

16.6 Other Types of Bus Protection 708

16.7 Auxiliary Tripping Relays 716

16.8 Summary 717

Problems 717

References 719

17 Transformer and Reactor Protection 721

17.1 Introduction 721

17.2 Transformer Faults 722

17.3 Magnetizing Inrush 729

17.4 Protection Against Incipient Faults 732

17.5 Protection Against Active Faults 735

17.6 Combined Line and Transformer Schemes 748

17.7 Regulating Transformer Protection 750

17.8 Shunt Reactor Protection 752

17.9 Static Var Compensator Protection 755

Problems 759

References 761

18 Generator Protection 763

18.1 Introduction 763

18.2 Generator System Configurations and Types of Protection 764

18.3 Stator Protection 766

18.4 Rotor Protection 781

18.5 Loss of Excitation Protection 785

18.6 Other Generator Protection Systems 789

18.7 Summary of Generator Protection 794

Problems 800

References 803

19 Motor Protection 805

19.1 Introduction 805

19.2 Induction Motor Analysis 806

19.3 Induction Motor Heating 824

19.4 Motor Problems 837

19.5 Classifications of Motors 843

19.6 Stator Protection 845

19.7 Rotor Protection 851

19.8 Other Motor Protections 852

19.9 Summary of Large Motor Protections 853

Problems 854

References 858

Part V System Aspects of Protection 861

20 Protection Against Abnormal System Frequency 863

20.1 Abnormal Frequency Operation 863

20.2 Effects of Frequency on the Generator 864

20.3 Frequency Effects on the Turbine 866

20.4 A System Frequency Response Model 869

20.5 Off Normal Frequency Protection 886

20.6 Steam Turbine Frequency Protection 887

20.7 Underfrequency Protection 889

Problems 903

References 905

21 Protective Schemes for Stability Enhancement 909

21.1 Introduction 909

21.2 Review of Stability Fundamentals 909

21.3 System Transient Behavior 918

21.4 Automatic Reclosing 929

21.5 Loss of Synchronism Protection 949

21.6 Voltage Stability and Voltage Collapse 957

21.7 System Integrity Protection Schemes (SIPS) 960

21.8 Summary 968

Problems 968

References 970

22 Line Commutated Converter HVDC Protection 973

22.1 Introduction 973

22.2 LCC Dc Conversion Fundamentals 974

22.3 Converter Station Design 992

22.4 Ac Side Protection 999

22.5 Dc Side Protection Overview 1002

22.6 Special HVDC Protections 1012

22.7 HVDC Protection Settings 1015

22.8 Summary 1016

Problems 1016

References 1018

23 Voltage Source Converter HVDC Protection 1021

23.1 Introduction 1021

23.2 VSC HVDC Fundamentals 1022

23.3 Converter Control Systems 1028

23.4 HVDC Response to Ac System Faults 1030

23.5 Ac System Protection 1031

23.6 Dc Faults 1035

23.7 Multiterminal Systems 1037

23.8 Hybrid LCC–VSC Systems 1037

23.9 Summary 1038

Problems 1038

References 1039

24 Protection of Independent Power Producer Interconnections 1041

24.1 Introduction 1041

24.2 Renewable Resources 1042

24.3 Transmission Interconnections 1042

24.4 Distribution Interconnections 1053

24.5 Summary 1060

Problems 1061

References 1061

25 SSR and SSCI Protection 1063

25.1 Introduction 1063

25.2 SSR Overview 1063

25.3 SSR and SSCI System Countermeasures 1073

25.4 SSR Source Countermeasures 1079

25.5 Summary 1093

Problems 1093

References 1095

Part VI Reliability of Protective Systems 1101

26 Basic Reliability Concepts 1103

26.1 Introduction 1103

26.2 Probability Fundamentals 1103

26.3 Random Variables 1110

26.4 Failure Definitions and Failure Modes 1127

26.5 Reliability Models 1129

Problems 1141

References 1143

27 Reliability Analysis 1145

27.1 Reliability Block Diagrams 1145

27.2 Fault Trees 1154

27.3 Reliability Evaluation 1166

27.4 Other Analytical Methods 1174

27.5 State Space and Markov Processes 1182

Problems 1190

References 1195

28 Reliability Concepts in System Protection 1197

28.1 Introduction 1197

28.2 System Disturbance Models 1197

28.3 Time-Independent Reliability Models 1208

28.4 Time-Dependent Reliability Models 1246

Problems 1256

References 1259

29 Fault Tree Analysis of Protective Systems 1261

29.1 Introduction 1261

29.2 Fault Tree Analysis 1262

29.3 Analysis of Transmission Protection 1273

29.4 Fault Tree Evaluation 1297

Problems 1306

References 1310

30 Markov Modeling of Protective Systems 1311

30.1 Introduction 1311

30.2 Testing of Protective Systems 1312

30.3 Modeling of Inspected Systems 1317

30.4 Monitoring and Self-testing 1331

30.5 The Unreadiness Probability 1337

30.6 Protection Abnormal Unavailability 1341

30.7 Evaluation of Safeguard Systems 1350

References 1356

Appendix A Protection Terminology 1359

A.1 Protection Terms and Definitions 1359

A.2 Relay Terms and Definitions 1361

A.3 Classification of Relay Systems 1363

A.4 Circuit Breaker Terms and Definitions 1366

References 1368

Appendix B Protective Device Classification 1371

B.1 Device Function Numbers 1371

B.2 Devices Performing More than One Function 1371

B.2.1 Suffix Numbers 1373

B.2.2 Suffix Letters 1373

B.2.3 Representation of Device Contacts on Electrical Diagrams 1374

Appendix C Overhead Line Impedances 1375

References 1387

Appendix D Transformer Data 1389

Appendix E 500 kV Transmission Line Data 1393

E.1 Tower Design 1393

E.2 Unit Length Electrical Characteristics 1393

E.3 Total Line Impedance and Admittance 1394

E.4 Nominal Pi 1395

E.5 ABCD Parameters 1395

E.6 Equivalent Pi 1395

E.7 Surge Impedance Loading 1397

E.8 Normalization 1399

E.9 Line Ratings and Operating Limits 1399

References 1400

Index 1401

Description
A newly updated guide to the protection of power systems in the 21st century
Power System Protection, 2nd Edition combines brand new information about the technological and business developments in the field of power system protection that have occurred since the last edition was published in 1998.

The new edition includes updates on the effects of short circuits on:

Power quality
Multiple setting groups
Quadrilateral distance relay characteristics
Loadability
It also includes comprehensive information about the impacts of business changes, including deregulation, disaggregation of power systems, dependability, and security issues. Power System Protection provides the analytical basis for design, application, and setting of power system protection equipment for today's engineer. Updates from protection engineers with distinct specializations contribute to a comprehensive work covering all aspects of the field.

New regulations and new components included in modern power protection systems are discussed at length. Computer-based protection is covered in-depth, as is the impact of renewable energy systems connected to distribution and transmission systems.

About the Author
PAUL M. ANDERSON, PhD, had over fifty years of experience in power system engineering and research, power education, technical writing, and research management. He served as a professor of engineering at Iowa State University, Arizona State University, and as a visiting professor at Washington State University. He also founded and ran Power Math Associates, a consulting firm, for over 25 years, and was elected to the National Academy of Engineering in 2009. Dr. Anderson passed away in 2011.

CHARLES F. HENVILLE is the President and Principal Engineer of Henville Consulting, Inc. He is a Fellow of the IEEE Power Engineering Society, as well as a Member fo the Association of Professional Engineers and Geoscientists of both British Columbia and Newfoundland and Labrador. He is a certified trainer in ASPEN OneLinertm Power System and Protective Relaying modeling software.

RASHEEK RIFAAT, is a Technical Director, Electrical with more than 40 years of Canadian and overseas experience in power system protection, cogeneration and thermal power generating stations, power transmission and distribution, and electrical systems for utilities as well as mining, heavy industries and commercial facilities. Rasheek has experience with various projects, ranging from installation of control panels and 600 V MCCs for material handling systems to large 800 MW thermal generating stations.

BRIAN JOHNSON, PhD, is a University Distinguished Professor of Electrical Engineering and Schweitzer Engineering Laboratories Endowed Chair in Power Engineering. He is a Senior Member of the IEEE, and an Individual Member of CIGRE. He is an Associate Editor for IEEE Transactions on Power Systems and Transactions on Power Delivery. He was the Technical Program Co-Chair for the 2015 International Conference on Power Systems Transients.

SAKIS MELIOPOULOS, PhD, is a Distinguished Professor at Georgia Tech. He is the co-inventor, with George Cokkinides, of the Smart Ground Multimeter and the Macrodyne PMU-based Harmonic Measurement System for transmission networks. He leads four field demonstration projects on four different utilities: USVI-WAPA, NYPA, Southern Company, and PG&E. He serves as the site director for the NSF I/URC PSERC, and is the academic administrator of the Power System Certificate program and the chairman of the Georgia Tech Protective Relaying Conference and the Fault and Disturbance Analysis Conference.

There are no comments for this item.

to post a comment.